Analog Guitar Overdrive Pedal
PART NO. 2176106
A solid-state overdrive/distortion effects pedal for guitar and other musical instruments. By including or leaving out optional
components (included) this pedal can be
"
tweaked
"
by you, the builder, during assembly to deliver tones for blues or rock. Or try your
own parts to build an effect that is uniquely your own!
Features:
True bypass switching: won't alter your tone when switched out
LED indicator
Die-Cast metal case for durability
Knobs control Drive and Level independently
Builder-customizable design for musical flexibility
All parts, circuit board, drill templates, and troubleshooting guides included.
Time Required: 3-4 hours depending on experience
Experience Level: Intermediate
Required tools and parts:
Soldering Iron and Solder
Needle-Nose Pliers or Hemostat
Wire Cutter (side cutters)
Wire Stripper
Drill bits and drill for drilling metal case (drill press recommended)
Voltmeter (optional, but recommended for troubleshooting)
Bill of Materials:
Qty
Jameco SKU
Component Name
1
11965
Aluminum Case
1
251125
RC4558 Dual Op-Amp, 8 Pin DIP
2
286302
100K Pot, Linear
1
281738
1/4" Audio Jack (Mono)
1
281746
1/4" Audio Jack (Stereo)
1
333973
Unicolor LED
1
23077
LED Holder
1
151116
0.1uF 25V Disk Capacitor
1
330431
1uF 25V Electrolytic, Radial Pkg
1
15190
0.001uF 50V Ceramic Disk Cap
1
15405
22pF 50V Ceramic Cap
1
15229
0.01uF 50V Ceramic Disk Cap
2
691585
1.0 Meg Ohm Carbon Film 1/4Watt
1
216427
9V Battery Holder
4
126981
Rubber Feet
2
264990
Knobs
1
526299
8-Pin DIP Socket
1
691024
4.7K Ohm Resistor, Carbon Film, 1/4 Watt
1
691489
390K Ohm Resistor, Carbon Film, 1/4 Watt
