SW-4010Q-MCL-M52 User Manual (Tentative)
Setting List
- 92 -
SWIRImageFormatControl
Configure image format settings for the SWIR channel.
SWIR Image Format Control Item
Setting Range
Default Value
Description
SWIRWidth
-
1024 (fixed)
Display the image width.
SWIRPixelFormat
Related Topic:
0: Mono8
1: Mono10
2: Mono12
0: Mono8
Set the pixel format.
SWIRTestPattern
Related Topic:
0: Off
1: GreyHorizontalRamp
2: GreyScale2
3:White
0: Off
Select the test image.
SWIRAcquisitionControl
Configure image capture settings for the SWIR channel.
SWIR Acquisition Item
Setting Range
Default
Value
Description
SWIRTriggerMode
Related Topic:
0:Off
1:On
0:Off
Enable/disable the Trigger mode.
SWIRTriggerSource
-
0: Low
Select the trigger signal source.
0: Low
1: High
10-13: PulseGenerator0-3
14-17: UserOutput0-3
20: Line4 TTL In1
21: Line5 Opt In1
23: Line7 CC1
24: Line10 TTL In2
26: NAND0 Out
27: NAND1 Out
28: Line13 TTL In3
29: EncoderTrigger
SWIRTriggerActivation
0:Rising Edge
1:Falling Edge
1:Falling
Edge
Select the polarity of the trigger signal (i.e., location of signal at which
trigger is applied).
