JAI GOX-5105M-PGE, User Manual

Page: 141 / 167

User Manual (Ver. 1.0) - Setting List
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 141 -
ShadingControl
Configure shading correction settings.
Related Topic: Shading Correction
Shading Control Item
Setting
Range
Default
Value
Description
ShadingCorrectionMode -
0: Flat
Shading
Select the shading correction method.
0: Flat Shading
1: Color Shading (Color models only)
ShadingMode
0: Off
1: User1
2: User2
3: User3
0: Off
Set the area to which to save shading correction data. When this is set to Off,
PerformShadingCalibration will not be executed.
PerformShadingCalibration - -
Execute shading correction.
This command can not be executed under the following conditions.
- When outputting no image.
- When outputting TestPattern.
- Width and/or Height are less than 512 ( ROI Function (Single ROI) )
- In FD2x2Binning mode ( Binning Function )
- In ImageScaling mode ( Image Scaling Mode (Xscale) )
- In Decimation mode ( Decimation Mode )
- In Sequencer mode ( Sequencer Function )
- In MultiRoi mode ( ROI Function (Multi ROI) )
- In Reverse mode ( Image Flip Function )
- In GradationCompression mode ( Gradation Compression Mode )
- In ALC mode ( ALC (Automatic Level Control) Function )
- AcquisitionMode is set to other than Continuous ( AcquisitionControl )
ShadingDetectResult - 0: Idle
Display the shading correction results.
0: Idle
1: Succeeded
2: Error1 - image was too bright
3: Error2 - image was too dark
4: Error3 - could not calibrated
5: Error4 - correction limit
6: Error5 - timeout