JAI GOX-12409C-PGE, User Manual

Page: 65 / 79

Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
65
BlemishControl
Configure settings for JAI white blemish correction.
Item Setting range Default value Description
BlemishEnable True, False True Enable/disable blemish correction.
BlemishDetect ー ー
Execute blemish detection.
This command cannot be executed under the following conditions.
・ When no image is output ・ Outputting TestPatter
・ In single ROI mode
・ In Binning mode
BlemishDetectionResult ー ー
Display the blemish detection results.
0:Idle
1:Succeeded
3:Error2 - exceeded max compensation number
4:Error3 - could not detected
5:Error4 - timeout
BlemishStore ー ー Save the location information of detected blemishes.
BlemishDetectThreshold 1 ～ 100 10 Set the blemish detection threshold.
BlemishCompensationIndex 1 ～ 256 1
Select the index for the target blemish coordinates
(BlemishDataPosition X/Y).
BlemishCompensationPositionX
GOX-6409MC-PGE:
-1 ～ 3087
GOX-12409MC-PGE:
-1 ～ 4015
GOX-20409MC-PGE:
-1 ～ 5471
-1
Display the X coordinate (horizontal pixel position) of the target blemish
selected in [BlemishCompensationIndex].
You can also manually enter the X coordinate of the blemish you want to correct.
BlemishCompensationPositionY
GOX-6409MC-PGE:
-1 ～ 2063
GOX-12409MC-PGE:
-1 ～ 3035
GOX-20409MC-PGE:
-1 ～ 3647
-1
Display the Y coordinate (vertical pixel position) of the target blemish selected
in [BlemishCompensationIndex].
You can also manually enter the Y coordinate of the blemish you want to correct.
BlemishCompensationDataClear ー ー
Delete detected or specified blemish information selected in
[BlemishCompensationIndex].
BlemishCompensationNumber 0 ～ 256 0 Display the number of target blemishes.
ShadingControl
Configure shading correction settings.
Item Setting range Default value Description
ShadingCorrectionMode
0:Flat Shading
1:Color Shading
0:Flat Shading
Select the shading correction method.
ShadingMode
0:Off, 2:User1
3:User2, 4:User3
0:Off
Set the area to which to save shading correction data.
When this is set to [Off], shading correction data is not saved.
PerformShadingCalibration ー ー
Execute shading correction.
This command can not be executed under the following conditions.
・ When no image is output
・ Outputting TestPattern
・ In Binning mode
ShadingDetectResult ー ー
Display the shading correction results.
[results]
0: Condition Error, 1: TooDark, 2: TooBright, 3: Correction Limit, 4: Complete