JAI GOX-12409C-PGE, User Manual

Page: 53 / 79

Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
53
Feature Properties
DeviceControl
Display/configure information related to the device.
Item Setting range Default value Description
DeviceVendorName ー "JAI Corporation" Display the manufacturer name.
DeviceModelName ー ー Display the model name.
DeviceManufacturerInfo ー See the possibilities Display the manufacturer information.
DeviceVersion ー ー Display the hardware version.
DeviceFirmwareVersion ー ー Display the firmware version.
DeviceFpgaVersion ー ー Display the FPGA version.
DeviceSerialNumber ー ー Display the device ID.
DeviceUserID Any ー Set the user ID (16bytes) for the camera.
DeviceTLType GigEVision
DeviceLinkSpeed
DeviceLinkHeartbeatMode 1 (Fixed) 1
DeviceLinkHeartbeatTimeout
500000 ～ 120000000
step 1000
3000000 Set the timeout of Heartbeat. (unit: μs)
DeviceStreamChannelCount
DeviceEventChannelCount
DeviceCharacterSet
DeviceReset
DeviceRegistersEndianness
DeviceTemperatureSelector Mainboard Mainboard
Select the area of the camera's interior for which to display the temperature
sensor's reading. (Fixed Mainboard)
DeviceTemperature(C) ー ー Display the internal temperature (°C) of the camera.
Timestamp (ns) ー
0 ～ 922337203685477580
7
(maximum value of
signed 64-bit)
Display the timestamp value. Resets to 0 when the signed maximum 64-bit
value is exceeded.
TimestampReset ー ー Forcibly sets the timestamp's count value to 0.
TimestampLatch ー ー
Sets the timestamp's count value to TimestampLatchValue.
TimestampLatchValue (ns)
0 ～ 9223372036854775807
(maximum value of signed
64-bit)
0
DeviceReset ー ー
Reset the device.
(After the camera receives this command, it returns an ACK response. Then,
execute reset.)
UserDefinedValueSelector
UserDefinedValue