Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
50
Action Control Function
The Action Control function is a function that executes the pre-configured action when the camera
receives action commands. Action commands can send both unicast and broadcast messages and
give instructions for actions to multiple cameras simultaneously by broadcasting them. A camera
that has this function can even give instructions for actions to different types of multiple cameras.
Although this function includes jitter and delays, it is useful for controlling multiple cameras
simultaneously.
Actions are performed when the following three conditions are met.
1.
ActionDeviceKey set to the camera and ActionDeviceKey in the action command match
2.
ActionGroupKey set to the camera and ActionGroupKey in the action command match
3.
ActionGroupMask set to the camera and GroupMask in the action command perform AND
operation, and the result is not 0.
About the Settings of the Camera
1.
Specify ActionDeviceKey.
2.
Then, specify two actions that can be configured on the camera.
Action1
Select 1 in ActionSelector.
Specify ActionGroupMask [ActionSelector].
Specify ActionGroupKey [ActionSelector].
Action2
Select 2 in ActionSelector.
Specify ActionGroupMask [ActionSelector].
Specify ActionGroupKey [ActionSelector].
3.
Set triggers (AcquisitionStart, AcquisitionEnd, FrameStart) to Action1 and Action2.
Setting Example
Assume that the following settings have been pre-configured on the camera.
ActionDeviceKey
: 0x00001001
ActionGroupMask[1]
: 0x00000011
ActionGroupKey[1]
: 0x00000001
ActionGroupMask[2]
: 0x00000111
ActionGroupKey[2]
: 0x00000002
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000002), Action2 is executed.
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000001), ActionDevice and
ActionGroupKey[1] match. However, the result of AND operation performed by ActionGroupMask is
0. Therefore, in this case, neither Action1 nor Action2 is executed.
How to use GigE Vision Action Commands
Related Setting Items
Summary of Contents for GOX-12409C-PGE
Page 72: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 72 Spectral Response GOX 6409MC PGE ...
Page 73: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 73 Spectral Response GOX 12409MC PGE ...
Page 74: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 74 Spectral Response GOX 20409MC PGE ...
Page 75: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 75 Dimensions ...
