User Manual (Ver.1.4) - Preparation
GOX-5105MC-CXP | GOX-8105MC-CXP | GOX-12405MC-CXP | GOX-16205MC-CXP | GOX-20405MC-CXP | GOX-24505MC-CXP
- 25 -
Step 2: Verifying Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED. When properly turned
on, the power LED is lit green.
For details on how to read the LEDs, see the
section.
Step 3: Verifying the Connection between the Camera and PC
Use an appropriate software tool associated with your CoaXPress frame grabber to set up the camera
and display captured images. Refer to the operation manual of the selected software tool for specific
instructions.
Note:
This camera does not support eBUS Player for JAI.
Step 4: Adjusting the Image Quality
Related Setting Items:
Display the camera image and adjust the image quality.
Adjust the Gain
Adjust the image quality using the gain and white balance functions. The Visibility must be changed
from Beginner to
Guru
.
Note:
For details on the Gain control, see
in the Main Functions chapter.
