User Manual (Ver. 2.0) - Main Functions
GO-5000M-PMCL | GO-5000M-PMCL-EP | GO-5000M-PMCL-UV
- 31 -
Digital IN/OUT Interface
Related Setting Items:
On this camera, the software control tool can assign the necessary signals used in the system to
digital inputs and outputs.
Line Selector
In the Line Selector, the following input and output signals can be assigned.
Line Selector Item
Description
NAND 0 IN 1
No. 1 input to the first NAND gate
NAND 0 IN 2
No. 2 input to the first NAND gate
NAND 1 IN 1
No. 1 input to the second NAND gate
NAND 1 IN 2
No. 2 input to the second NAND gate
Line Source
Line source signal can be selected from the following table to connect it to the line item which is
selected in the line selector.
Line Source Item
Description
Low
Connect Low Level signal to line item selected in Line Selector (Default setting)
High
Connect High Level signal to line item selected in Line Selector
Frame Trigger Wait
Connect Frame Trigger Wait signal to line item selected in Line Selector
Frame Active
Connect Frame Active signal to line item selected in Line Selector
Exposure Active
Connect Exposure Active signal to line item selected in Line Selector
FVAL
Connect FVAL signal to line item selected in Line Selector
LVAL
Connect LVAL signal to line item selected in Line Selector
Note:
Some line items cannot be connected. Refer to “GPIO Matrix Table”.
Pulse Generator 0 Out
Connect Pulse Generator 0 signal to line item selected in Line Selector
CL CC1 In
Connect CL CC1 IN signal to line item selected in Line Selector
NAND 0 Out
Connect NAND 0 signal to line item selected in Line Selector
NAND 1 Out
Connect NAND 1 signal to line item selected in Line Selector
