User Manual (Ver. 2.0) - Preparation
GO-5000M-PMCL | GO-5000M-PMCL-EP | GO-5000M-PMCL-UV
- 24 -
Example: Change the PixelFormat setting (ImageFormatControl)
1. To check the current PixelFormat setting, enter the command
BA?<CR><LF>
from the terminal
emulator software.
2. To change the PixelFormat setting to Mono10, enter
BA=1<CR><LF>
.
Step 5: Adjust the Image Quality
Related Setting Items:
Display the camera image and adjust the image quality.
Display the Image
Display the image captured by the camera. Please display the image with the viewer on the frame
grabber board application.
Adjust the Gain
The gain control uses Analog Base Gain and Digital Gain.
For setting the gain manually,
1. Set Analog Gain (select from 0dB, +6dB and +12dB).
2. Set Digital Gain.
The master gain (DigitalAll) can be set x1 (0dB) to x16 (+24dB) against the analog base gain.
The resolution for gain setting is x0.01/step which is 0.05dB to 0.08dB, depending on the setting
value.
Item
Short ASCII
Command
Values
GainRawDigitalAll
FGA
Setting Range: 100 ~ 1600
AnalogBaseGainAll
ABALL
0: 0dB, 1: 6dB, 2: 12dB
GainAuto
AGC
0: Off, 1: Continuous
