User Manual (Ver. 1.0) - Features
GO-5000M-PMCL-1 | GO-5000M-PMCL-EP-1 | GO-5000M-PMCL-UV-1
- 12 -
Features
GO-5000M-PMCL-1, GO-5000M-PMCL-EP-1 and GO-5000M-PMCL-UV-1 are small-in-size cameras
providing both high resolution and a high frame rate with excellent image quality for machine vision
applications. They are monochrome progressive scan COMS cameras equipped with CMOS sensors
offering a 1-inch image format, a resolution of 5 million pixels, and a 5:4 aspect ratio. They provide a
maximum of 107.2 frames per second for continuous scanning with 2560 x 2048 full pixel resolution in
1x8-1Y, 8-bit output format. The UV model has sensitivity in the UV region. The EP and UV models
has 4-pin connector for external power supplies.
These cameras have various comprehensive functions needed for automated optical inspection
applications, such as solid state device inspection or material surface inspection. They incorporate
video processing functions such as a look-up table, flat field shading compensation, and blemish
compensation in addition to fundamental functions such as trigger, exposure setting, and video level
control.
Feature Overview
l
Compact and Rugged housing Series, 1” progressive scan camera
l
Intelligent body design for easy and flexible installation
l
Aspect ratio 5:4, 2560(H) x 2048(V) - 5.2 million effective pixels (5 μm square pixels)
l
S/N 55 dB with Dark Compression ON
l
8-bit, 10-bit or 12-bit output
l
Various readout modes, including horizontal and vertical binning, and ROI (Region Of Interest)
for faster frame rates
l
0dB to +24dB gain control
l
10 μs (1/100,000) to 8 seconds exposure control in 1 μs step
l
Auto exposure control / Timed and trigger width exposure control
l
RCT trigger mode for specific applications
l
ALC control with combined function of AGC and auto exposure
l
HDR (High Dynamic Range) function is available
l
Various pre-processing circuits are provided: Programmable LUT, Gamma correction (0.45, 0.6
and 1.0 3 steps), Blemish compensation
l
C-mount for lens mount
