GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Settings List
- 90 -
Supported GigEVision Options
: Link Local Address configuration, DHCP configuration, Persistent IP configuration, Stream
Channel Source Socket, Message Channel Source Socket, Command Concatenation, Write Mem, Packet Resend, Event,Event
Data, Pending Ack, Action, Extended Status Codes, Discovery Ack Delay, Discovery Ack Delay Writable, Test Data, Manifest
Table, CCP Application Socket, Link Speed, Heartbeat Disable, Serial Number, StandardIDMode, IEEE1588Support,
UniconditionalAction, ScheduledAction, PrimaryApplicationSwitchover, ExtendedStatusCodesVersion2_0, UserDefinedName,
SingleLink, MultiLink, StaticLAG, DynamicLAG, PAUSEFrameReception, PAUSEFrameGeneration,
StreamChannel0BigAndLittleEndian, StreamChannel0PacketResendDestination, StreamChannel0AllInTransmission,
StreamChannel0UnconditionalStreaming, StreamChannel0ExtendedChunkData
ActionControl
Configure action control settings.
Action Control Item
Setting
Range
Default
Description
Action Device Key
-
0x00
Set the action device key.
Action Selector
1 ~ 2
1
Select the action.
Action Group Mask
-
0x00
Set the mask value that creates the action 0 group,
Action Group Key
-
0x00
Set the key that executes action 1.
Action Queue Size
-
255
Set the size of action queue.
