AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Main Functions
- 46 -
Adjusting the Gain Individually for RGB (Individual Mode)
When using this mode, set
IndividualGainMode
to
On
.
Adjust the
AnalogGreen
,
AnalogRed
,
DigitalRed
,
AnalogBlue
,
DigitalBlue
setting values to adjust
the gain.
This mode allows a wider range of adjustment by the user when compared to Master Mode.
Note:
The baseline for 0 dB is different between MasterMode and IndividualMode. 0 dB in
MasterMode is about 6 dB higher than 0 dB in IndividualMode.
Automatic Gain Level Control
GainAuto
) can be used to automatically control gain levels.
In combination with
ExposureAuto
), GainAuto can be used to adjust various
changes in brightness (
). In the ALC function, the automatic control of
the gain level is called AGC (Auto Gain Control), and it automatically adjusts the Gain so that the
average level of the ALC target area is equal to the level specified in ALCReference (
).
GainAuto
Description
Off
No AGC (Auto Gain Control). The user-set Gain value is used.
Once
AGC automatically adjusts the Gain level only once. After that, GainAuto returns to Off.
Continuous
ExposureAuto = Off
: AGC automatically adjusts the Gain level continuously.
ExposureAuto = On
: AGC and ASC (Auto Shutter Control) automatically adjust the brightness
level, continuously. For more information, see "
".
