JAI Apex Series, User Manual

Page: 35 / 113

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0) Main Functions
- 35 -
During Continuous Operation
This scenario is when FrameStart trigger is Off or ExposureMode is Off .
Note: See " H_Period " for the H_Period, A, B, and PackValue.
1. Maximum frame rate of sensor output
Sensor FR = 1 / {H_Period × ( A )}
2. Maximum frame rate by interface
Interface FR = 3000 × 1000000 / (Height × Width × PackValue)
3. Maximum frame rate
FR_Cont = Min(Sensor FR, Interface FR)
When the ExposureTime is longer than the FramePnterval
1. Maximum exposure time at maximum frame rate
MaxExposureTime_TrOlrd = (1 / FR_Cont) - (B × H_Period)
2. Exposure time outside of Frame Period
NonOverlapExposureTime = ExposureTime - MaxExposureTime_TrOlrd
Note: However, NonOverlapExposureTime calculation results that are 0 or below will be considered
as 0.
3. Maximum frame rate
FR_ContLongExposure = 1/{(1/FR_Cont) + NonOverlapExposureTime}