AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Preparation
- 29 -
To Save User Settings
1. Stop image acquisition.
2. Expand
UserSetControl
and select the save destination (UserSet1 to UserSet3) in UserSetSelector.
Note:
The factory default setting values are stored in Default and cannot be overwritten.
Caution:
Settings can only be saved when image acquisition on the camera is stopped.
3. Select
UserSetSave
and click the
UserSetSave
button.
4. The current setting values are saved as user settings.
To Load User Settings
1. Stop image acquisition. User settings can only be loaded when image capture on the camera is stopped.
2. Select the settings to load (UserSet1 to UserSet3) in UserSetSelector.
3. Select
UserSetLoad
and click the
UserSetLoad
button.
4. The selected user settings are loaded.
Note:
When selecting
Default
, the factory settings are loaded.
