AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0)
Main Functions
- 77 -
Internal Camera Blocks
To Use the Counter Function
Configure the settings as follows. Specify a counter (Counter0 ~ 2), and configure the settings.
Item
Setting Value / Selectable
Range
Description
Counter 0 ~ 2
Counter 0 ~ 2
Select the counter.
- CounterEventSource
Counter0: Off, FrameTrigger
Counter1: Off, ExposureStart
Counter2: Off, SensorReadOut
Select the counter event signal for which to
read the count value. When set to Off, the
counter operation will stop (but will not be
reset).
- CounterEventActivation
When the counter function is
enabled, Counter0, Counter1,
and Counter2 are fixed at
RisingEdge.
Specify the timing at which to count.
Non-Volatile Flash Memory
Storing Data in On-Camera Flash Memory
The camera has non-volatile memory for users to store data. Refer to the technical note “Storing Data
in On-Camera Flash Memory” for more information.
Note:
JAI strongly recommends saving images to the PC or other storage location because the
non-volatile flash memory may not have enough memory size to store large data.