AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0)
Preparation
- 21 -
Caution:
For heavy lenses, be sure to support the lens itself. Do not use configurations in which
its weight is supported by the camera.
③
Camera Link Cable
Connect the Camera Link cable to the Mini Camera Link connector.
l
Use a cable that supports the Camera Link standard and is compatible with Mini Camera Link
(SDR) connectors.
l
Refer to the specifications of the cable for details on its bend radius.
l
For details on the cable, see
.
Cautions
:
l
Refer to
Notes on Camera Link Cable Connections
when connecting the cables to the
connectors.
l
When power is supplied by PoCL, be sure to connect the camera link cable to both DIGITAL
I / O - 1 and DIGITAL I / O - 2 regardless of the setting.
④
Frame Grabber Board
Refer to the operating instructions of the frame grabber board and configure settings on the computer
as necessary. (Use a computer that meets the requirements of your frame grabber board).
⑤
DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑥
AC adapter (Power Supply, If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / trigger IN
connector on the camera.
Note:
The AC adapter is not required when using PoCL.