6
CAMERA CHARACTERISTICS
This manual is intended to visually guide users through the individual steps to properly program, operate
and maintain the 4G GSM version of the JAGER PRO M.I.N.E.
™ and
JAGER PRO
I.C.E.™ Cameras.
1.
Antenna:
Standard antenna shown receives
cell tower signals. Several high gain booster
antennae are available as an accessory for
operation in low signal areas.
2.
IR Illuminator:
44 infrared LEDs that
illuminate the target area when camera
functions at night.
3.
Camera Lens:
The camera lens has a 52-
degree field of view with no magnification.
This enables
users to observe a 20’ field of
view measured 15’ from the lens and a 32’
field of view when measured 21’ fro
m the lens.
4.
PIR Sensor:
Passive Infrared motion detector.
Senses the presence of a moving object which
triggers the camera to take a photo or record a
video.
5.
Ambient Light Sensor:
Detects surrounding
light to automatically control day and night
camera functions. This sensor also emits a
red, blinking LED when the selector switch is
moved to
SETUP.
The LED will stop blinking
within 10 seconds after the selector switch is
moved from
SETUP
to
ON
indicating the
camera is operational and active.
6.
Locking Latch:
Secures the camera front
housing to the main body housing while
providing a waterproof seal to internal
components
.
Summary of Contents for M.I.N.E.
Page 1: ...Australian Version 1 2...
