ADwin-Gold
USB / ENET, manual version 3.8, October 2005
5
System description
ADwin
Standard delivery
The standard delivery items for the
ADwin-Gold
system:
– the
ADwin-Gold
system with USB or Ethernet interface,
– a USB cable or a cross-over Ethernet cable from the PC to the Gold
device (length about 1.8m).
– the power adapter: a three-pin power supply cable, which prevents the
possibility of mismatch, at a slot metal sheet with socket connector,
– the power supply cable from the power adapter to the system,
– the
ADwin
CDROM,
– the manual "Driver Installation",
– this hardware manual.
Options
2.2.1 Options (no upgrades possible)
The following options are available:
–
Gold-D
: All inputs and outputs have DSub-connectors, including the
analoge inputs (instead of BNC plugs).
–
Gold-DA
: 6 additional analog outputs (differential) with a 16-bit DAC
each.
–
Gold-CO1
: counter option with four 32 bit counters, which can optionally
be used for period width measurement, as impulse counters or as
up/down counters with clock/direction or four edge evaluation for
quadrature encoders.
–
Gold-CAN
: 4 decoders for use with incremental encoders with SSI inter-
face, 2 CAN interfaces (both either high speed
or
low speed) and 2
RSxxx interfaces (RS232, RS485). This option is available in combina-
tion with the option Gold-D only.
–
GOLD-MEM-64
: external memory with 64MB instead of 16MB and
512kB internal CPU memory instead of 256kB.
–
Gold-Boot
: Flash-EPROM boot loader for stand-alone operation without
PC (
only
in combination with the
Gold-ENET
).
If not excluded above, all additional options can be combined with each other.
Accessories
2.2.2 Accessories
–
ADbasic
, real-time development tool for all
ADwin
systems
–
ADwin-Gold
-pow
: external power supply (necessary for notebook oper-
ation)
–
Gold-Mount
: kit for installation of the
ADwin-Gold
system on a DIN rail.
– Single cable-connector for a self-made external power supply cable.
