Declaration of Incorporation
Item no. 11503005, Revision 07
35 ( 36 )
15
Declaration of Incorporation
Under the EC Machinery Directive
The safety instructions of the
product documentation sup-
plied must be observed.
Alfred Jäger GmbH
SF-Elektromaschinenbau
Siemensstr. 8
D-61239 Ober-Mörlen
Tel. +49 (0) 60029123 -0
hereby declare that the product,
Product
High Frequency Spindle
Type
Chopper 1500 HSK S5A
Serial no.
See last page of manual
as far as possible from the supplied, complies with the essential requirements
of the Machinery Directive 2006/42/EC.
Sections of the Machinery Directive have been applied: 1.1.1; 1.1.2; 1.1.5; 1.3.2;
1.3.4; 1.5.1; 1.5.2; 1.5.4; 1.5.5; 1.5.6; 1.5.8; 1.5.9; 1.6.4; 1.6.5; 1.7.1; 1.7.1.1; 1.7.2;
1.7.3; 1.7.4;
The incomplete machinery in its standard design complies furthermore with
the following applicable regulations:
Applicable harmonized standards
DIN EN ISO 12100
Safety of machines
The machinery is incomplete and must not be put into service until the ma-
chinery into which it is to be incorporated has been declared in conformity
with the provisions of the Machinery Directive 2006/42/EC and any other ap-
plicable regulations.
We at Alfred Jäger GmbH agree to submit the special documents for incom-
plete machines to national authorities upon request.
The special technical documentation referred to in Annex VII, Part B, belong-
ing to the machine has been created.
Person who is authorized to compile the documents listed in Annex VII, Part B:
Alfred Jäger GmbH
Ober-Mörlen, 05.10.2021
Place and date of issue
Bernd Jäger
Executive Board
