USING YOUR STANDARD & CONVECTION OVEN
RJGR SERIES
operation
RJGR Series Ovens
Ovens in the RJGR Series are engineered to operate in
five different modes: standard bake, convection bake,
standard broil, convection broil and convection defrost.
Operating The RJGR Series Oven
If your Jade model has two ovens, find the POWER
SWITCH and THERMOSTAT KNOB that correspond
to the oven you wish to use. LEFT and RIGHT ovens
are operated with controls located on corresponding
sides.
1. Make sure the thermostat knob for the oven is in the
OFF position.
2. Before heating, place the oven racks in the desired
position.
Warning:
Use extreme caution when moving racks
while the oven is hot. We recommend the use of
oven mittens or potholders to prevent injury.
3. Follow the RJGR SERIES SETTINGS on page 25
to determine appropriate settings for each of the
five operation modes.
4. Turn the POWER SWITCH ON by pushing the
switch to the middle position. This will also
illuminate the POWER LIGHT. Push the switch
one setting further to activate the OVEN LIGHT (as
needed).
5. Push in the oven thermostat and set to a desired
cooking temperature between 150
°
-550
°
F. The
orange bake light will light to indicate the oven is
on. When the desired temperature has been reached,
the orange bake light will turn off to indicate the
burner is off. The oven thermostat will cycle on and
off to maintain the desired temperature at a constant
level.
OFF
ON
POWER & OVEN LAMP SWITCH
LAMP ON
OVEN THERMOSTAT
22
