M-P2L1-1 EN
Page 24
Release Date: November 15, 2019
Rev 01
5.3.2.1.2 Alarms
Press 2 to enter the sub-menu Alarms. All the Alarm events are displayed chronologically from newest to
oldest.
F1 stands for the number of the output group, press F2 to return to the first page, press F3 to print out the
event log (if the optional printer is attached), press F4 to return to the previous page, press F5 scroll down
to the next page, press F6 to exit the current interface.
The format of the alarm log display is:
DD/MM/YYYY HH:MM:SS Zaaa b-ccc Device Category Alarm
Where:
DDD/MM/YYYY is Day/month/year
HH:MM;SS is hour:minute:second
Zaaa is the Zone number
b is the loop number
ccc is the device address
Device Category is the category of device (MCP, Smoke, etc.)
5.3.2.1.3 Faults
Press 3 to enter the sub-menu Faults. All the Fault events are displayed chronologically from newest to
oldest.
F1 stands for the number of the output group, press F2 to return to the first page, press F3 to print out
the event log, press F4 to return to the previous page, press F5 scroll down to the next page, press F6
to exit the current interface.
5.3.2.1.4 Operator actions
Press 4 to enter the sub-menu operator actions. All of the Operator Actions are displayed chronologically
from newest to oldest.
F1 stands for the number of the output group, press F2 to return to the first page, press F3 to print out
the event log, press F4 to return to the previous page, press F5 scroll down to the next page, press F6
to exit the current interface.
5.3.2.1.5 I/O log
Press 5 to enter the sub-menu I/O log. All the I/O events are displayed chronologically from newest to oldest.
F1 stands for the number of the output group, press F2 to return to the first page, press F3 to print out
the event log, press F4 to return to the previous page, press F5 scroll down to the next page, press F6
to exit the current interface.
5.3.2.2 View faults
Press the Home key and then press F1 to enter the View menu, then press 2 to enter this sub-menu. The
event log related to faults is chronologically listed together with the detailed specification on the device in
fault and the type of fault. On the top of the screen, the sum of events in fault is indicated.
Press F1 to return to the first page, press F2 to view previous page, press F3 to view next page, press F4 to
page up, press F5 to page down, press F6 to exit.
