Jadak Photo Research SpectraScan PR-7 Series, User Manual

Page: 47 / 142

Chapter 5
– Setup Menu
43
Chapter - 5 S
ETUP
M
ENU
I
NSTRUMENT
S
ETUP
I
NSTRUCTIONS
Prior to making a measurement, it is necessary to ensure that the instrument is aware of the accessory the
aperture, the exposure (integration) time, the sensitivity mode, the number of measurements to average, the
SYNC mode and the Dark Current mode that will be used during the upcoming test to insure that proper
calibration factors are applied following the measurement.
FIGURE 33 - MAIN SCREEN FIGURE 34 - SYSTEM MENU
FIGURE 35 - SETUP MENU FIGURE 36 - PR-7XX INSTRUMENT SETUP
1. From the main screen, touch Menu ( or use the navigation keys). The System Menu appears.
2. Touch Setup and then touch Instrument Setup.
3. The Instrument Setup menu appears.
H
OW TO
S
ELECT THE
B
ANDWIDTH
For those instruments supplied with the variable bandwidth option, this field provides a means for selecting the
desired option. If your PR-7XX has a single bandwidth, no choices are available in this field.
To select the Bandwidth:
1.
To scroll through choi
ces, touch the ▼ or ▲ arrows adjacent to the
BW field until the preferred choice
appears.