Jadak PHOTO RESEARCH SpectraScan PR-655 User Manual Download Page 43

Page: 43 / 160

PR-655/670 User Manual

NABLE AND

ISABLE

NSTRUMENT

OUNDS

The PR-655 and PR-670 can audibly alert the user to various conditions of the instrument including

audible

button click feedback, measure shutter sounds, measurement complete alerts

and

low battery warning.

enable and disable these features:

FIGURE 26 - SOUNDS AND ALERTS SCREEN

From the

Preferences

menu, touch

Sounds & Alerts.

The field to the right of the field descriptor displays the status of that feature. To enable or disable all
sounds, touch the

Sounds & Alerts

field. This field must be set to

Enabled

in order to gain access to the

fields below it.

Sounds & Alerts

is enabled, touch any field next to its descriptor to toggle between enabled and

disabled.

Touch

Back

when finished.

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

































































































































































Search results

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

Reviews:

Related manuals for PHOTO RESEARCH SpectraScan PR-655

Brands by name

Popular brands

Jadak PHOTO RESEARCH SpectraScan PR-655, User Manual

Search results

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

Reviews:

Related manuals for PHOTO RESEARCH SpectraScan PR-655

Brands by name

Popular brands