Jadak PHOTO RESEARCH SpectraScan PR-655 User Manual Download Page 29

Page: 29 / 160

PR-655/670 User Manual

NSERTING THE

ATTERY

Facing the front of the instrument, slide the battery door latch away from
the objective lens until the door opens (See

FIGURE 15

Orient the battery so that the two copper contacts face toward the

objective lens, and toward the rear of the instrument.

Gently insert the battery until it ‘clicks’ into place.

Close the battery door. Make sure the Battery Door Latch has engaged.

FIGURE 16 - INSERTING BATTERY INTO THE PR-655/670

EMOVING THE

ATTERY

Facing the front of the instrument, slide the battery door
latch away from the objective lens until the door opens
(See

FIGURE 15

Press the Battery Eject button located in the upper right
hand corner of the battery compartment. The battery
will eject. Remove the battery from the compartment.

Close the battery door. Make sure the Battery Door
Latch has engaged.

FIGURE 17 - REMOVING BATTERY FROM PR-655/670

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

































































































































































Search results

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

Reviews:

Related manuals for PHOTO RESEARCH SpectraScan PR-655

Brands by name

Popular brands

Jadak PHOTO RESEARCH SpectraScan PR-655, User Manual

Search results

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

Reviews:

Related manuals for PHOTO RESEARCH SpectraScan PR-655

Brands by name

Popular brands