HS-1RL
User’s Manual
Page 36
Auto Exposure
Allow the imager to control gain and exposure settings automatically.
Default = Enabled.
Disable
* Enable
Maximum Exposure
Set the maximum allowable exposure for the unit between 1 and 7874.
Several commonly used Max Exposure menu command barcodes are included below. If a
different value other than those provided is needed, it can be set either by sending the serial
command
EXP_MAX x
(where ‘x’ is a value between 1 and 7874),
or by building a menu
command barcode.
Default value = 100.
Setting examples:
Target White Value
Set the Target White Value within a range of 48 to 212.
Some menu command barcodes are included below. If a different value other than those
provided is needed, it can be set either by sending the serial command
EXPTARG x
(where ‘x’ is
a value between 48 and 212),
or by building a menu command barcode.
Default value = 120.
