46
J-400
11.11 Waterfall Control
Turn waterfall control valve counterclockwise to increase
waterfall output. Turn control valve clockwise to decrease or
turn off waterfalls.
Note:
When the waterfall is in the OFF position, some water may still
flow through. This is considered normal.
11.12 Air Controls
Certain jet systems have their own “toggle” on/off air control.
Each control introduces air into the water lines that supply
specific jet groups. Simply press any air control button to open
or press the opposite side of button to close. To minimize heat loss, all air
controls should be closed when the spa is not in use.
Note:
Certain jets may draw air even though they are closed. This is
considered normal.
11.13 Selecting the Desired Massage Action
Your Jacuzzi spa is equipped to allow you to customize
the massage action you desire. Each model incorporates
a massage selector that allow you to customize the
massage and performance by diverting water between
various jet systems. Simply turn massage selector to
position A (Combo), B, or C to divert water pressure to
various jet groups.
Note:
The massage selector valve(s) is designed to operate in positions
A (Combo), B, and C for optimum performance. It is considered normal
for sound levels within the valve to vary between positions due to the
large amounts of water flowing through it. For optimum filtration benefits,
leave the valve in position A when spa is covered. Select position B or C
for maximum jet performance during spa use.
11.14 Indicator Light
The indicator light located on the front cabinet panel of the
spa is an early detection system that will notify you when
the spa needs immediate attention. A solid white light indicates that all
operations are normal. A solid red light indicates that immediate attention
is required to clear or fix an error code. For a detailed explanation refer to
page 73. Always insist on genuine Jacuzzi replacement parts.
11.15 Optional Exterior Lights
The optional exterior lights are located on the corners of the cabinet
panels. They provide a colorful luminance around the spa. These
lights are activated from the light menu. The only light color option
is white. At start-up, the exterior lights flash on and off to indicate
a connection. The lights have a timeout period of 8 hours. For
operating instructions refer to page 41.
B
C
A
Lighted control
valve shown.