J-200
13
.3 CLEARRAY® Water Purification System
CLEAR
RAY
Water Purification System is exclusive
technology utilizing natural ultraviolet technology to
eliminate waterborne bacteria, viruses, and algae in
portable spas. The ultraviolet light otherwise know as
UV-C or germicidal light inactivates the microorganisms
disrupting the DNA so that it cannot reproduce and is
considered lifeless. CLEAR
RAY
is plumbed in-line with your
filtration system. After the water is drawn from the pump, filter,
and heater it is then directed though the CLEAR
RAY
system.
Water passes through an ultraviolet light energy that treats and
disinfects the water. The water is then pumped back into the
spa giving you crystal clear water instantly. The system has a
ballast that is the power supply for the purification system; it has two LED
indicator lights the green indicating incoming power and the red
indicating the system is properly working. CLEAR
RAY
is standard for all
models.
Note:
The CLEAR
RAY
System only runs when the jets pump 1 is
running.
After a year the bulb must be replaced. If the UV timer has been
programmed correctly a message will appear on the LED display when
the time allotted has expired. In order to clear the “blb” message a new
UV bulb needs to be installed and the timer must be reset (Section 11.6,
page 31).
Note:
In order to access the CLEAR
RAY
unit, the front synthetic panel or
the stereo panel and the right corner panel need to be removed.
WARNING!
DO NOT LOOK AT LIT BULB
SEVERE EYE DAMAGE
OR BLINDNESS CAN OCCUR
120 - 230V
41
