7
TRACTOR
CAB
ASSEMBLY INSTRUCTIONS
7.
Set the front panel on the tractor and insert two
5/16 X 1" bolts through the frame and
treadplate. Next, bolt the top of the front panel
to the front of the roof panel as shown.
8.
Bolt the four hinges to the rear panel with (8)
5/16 X 3/4" bolts as shown in Photo 3.
9.
Tighten all bolts that have been installed at this
time. Install weatherstrip around the door
opening along the top and front sides as shown
in Photo 3.
10. Attach striker plate to cab frame as shown in
Drawing B. Install door on hinges. Assemble
latch to door as shown in Drawing B. Adjust
striker plate forward or back to provide the
inside handle to catch approximately 1/2".
Adjust the tightness of the latch by adjusting the
3/8" and 1/4" nuts in or out. In a few cases the
striker plate may need to be bent slightly.
NOTE: Doors may require bending slightly for best
fit.
Drawing B
Photo 2
Photo 3