6
TRACTOR
CAB
ASSEMBLY INSTRUCTIONS
1.
Have a ROPS approved roll bar and seat belt
mounted to your tractor, using the roll bar
instructions.
NOTE: If you have a canopy on the roll bar, it
needs to be removed.
2.
(420 only, if applicable) Move steering cylinder
mount on the treadplate to the outside hole.
THIS IS VERY IMPORTANT! (See Drawing A)
3.
Open the hardware package and sort the bolts
and nuts according to size.
4.
Slide the rear panel over the roll bar and fasten
with (4) “W” shaped clamps A and (8)
5/16 X 1" bolts. Leave bolts loose at this time.
5.
Lay the roof panel in place and bolt to the rear
panel with (9) 5/16 X 3/4" bolts.
NOTE: The rear panel may need to be moved to fit
roof panel as shown in Photo 3 Page 7.
6.
Drill (2) 11/32" holes in the front corners of the
tread plate as shown in Drawing A.
Drawing A
Photo 1