Jacobsen STEINER 75-70710 Owner/Operator'S Manual & Illustrated Parts List Download Page 6

4

TRACTOR

CAB

SAFETY

NOTICE !!!

Unauthorized modifications may present extreme
safety hazards to operators and bystanders and
could also result in product damage.

Jacobsen, a Textron Company strongly warns
against, rejects and disclaims any modifications,
add-on accessories or product alterations that are
not designed, developed, tested and approved by
Jacobsen Engineering Department.  Any Jacobsen
product that is altered, modified or changed in any
manner not specifically authorized after original
manufacture–including the addition of “after-market”
accessories or component parts not specifically
approved by Jacobsen–will result in the Jacobsen
Warranty being voided.

Any and all liability for personal injury and/or property
damage caused by any unauthorized modifications,
add-on accessories or products not approved by
Jacobsen will be considered the responsibility of
the individual(s) or company designing and/or
making such changes.  Jacobsen will vigorously
pursue full indemnification and costs from any party
responsible for such unauthorized post-manufacture
modifications and/or accessories should personal
injury and/or property damage result.

This symbol means:

ATTENTION!
BECOME ALERT!

Your safety and the safety of others is involved.

Signal word definitions

:

The signal words below are used to identify levels
of hazard seriousness. These words appear in this
manual and on the safety labels attached to
Jacobsen machines. For your safety and the safety
of others, read and follow the information given with
these signal words and/or the symbol shown above.

DANGER  indicates an imminently hazardous
situation which, if not avoided, WILL result in death
or serious injury.

WARNING  indicates a potentially hazardous
situation which, if not avoided, COULD  result in
death or serious injury.

CAUTION indicates a potentially hazardous
situation which, if not avoided, MAY result in minor
or moderate injury. It may also be used to alert
against unsafe practices or property damage.

CAUTION  used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, MAY result in property damage

MODEL NUMBER:  This number appears on
sales literature, technical manuals and price
lists.

SERIAL NUMBER:  This number appears only
on your mower. It contains the model number
followed consecutively by the serial number.
Use this number when ordering parts or seeking
warranty information.

Summary of Contents for STEINER 75-70710

















Reviews: