
10
TRACTOR
CAB
INSTALLATION
INSTRUCTIONS FOR MOUNTING ASSEMBLED CAB ON TRACTOR
1.
Tractor must be equipped with a rollbar.
2.
With the cab doors removed, position the assembled cab into position around the rollbar.
3.
Fasten the cab to the rollbar with the “W” clamps and 5/16 X 1 bolts.
4.
Fasten the lower front cab frame to the front corners of the tread plate with 5/16 X 1 bolts.
5.
Install the cab doors and check for proper latch closure. Adjust latches as needed.
See Page 7 Step 10 for adjustments.
6.
Attach the elastic cords to position the front fabric panels around the tractor. Loop the elastic cord over
the “S” hook to prevent rubbing the driveshaft.
7.
Connect wiring for the wiper motor.
8.
IMPORTANT! (420 tractors only, if applicable) Check steering cylinder mounting to be certain it is
mounted in the outside hole of the tread plate to limit turning radius.