Jacobsen Bunton 630024, Setup, Parts & Maintenance

Page: 12 / 41

10
Gear
Drive
Midsize
ENGINE
DAILY
Remove the dipstick S and check that the oil level
reaches the full mark. If necessary, top off with fresh oil.
To obtain the correct oil level, the machine must be
level. See engine manufacturer’s manual for proper oil
viscosity and grade.
DO NOT OVER FILL!
AFTER THE FIRST 5 WORKING HOURS
While the engine is warm, remove the drain plug P and
drain the crankcase. Replace oil filter. Clean and
replace the plug. Fill the crankcase through the filler
hole with fresh oil to the full mark. See engine
manufacturers manuals for oil and filter change
intervals.
Engine operator’s manuals are shipped with each
machine. Shop manuals for the engines are available
from your local engine dealer.
For Kawasaki FH500V, order: 99920-2129-03.
For Kawasaki FH451V, order: 99920-2129-03.
GEARBOX
Transmission X is sealed for life from the factory and
should require no maintenance. See the parts
breakdown in this manual for service parts and how
to contact the Dana Transmission Service
Department.
LUBRICATION