Jacobsen AR3, Technical/Repair Manual

Page: 18 / 342

SAFETY
4181384 First Edition 1-11
1
Service Electrical Components
Safely
!
WARNING
• Disconnect the battery negative (–) cable before
removing or installing electrical components. Always
connect the battery negative (–) cable last.
• Certain test and adjustment procedures must be
performed with the battery connected. Use care to
prevent arcing when working on live circuits or
components. Arcing can cause component damage
and could ignite flammable materials.
Dispose of Waste Materials
Safely
Routine service can produce waste products such as
used oil, coolant grease, and used batteries.
If not handled properly, these materials can pose a threat
to the environment.
Collect fluids in well-marked, approved storage
containers. Some waste fluids can react with certain
types of plastics. Make sure the fluid to be stored is
compatible with the storage container. Never use food or
beverage containers to store waste fluids.
IMPORTANT
• Dispose of waste fluids properly at approved local
recycling centers. If recycling facilities are not
available, contact your local community for the
correct disposal procedure for waste fluids.
• Dispose of old batteries properly. Battery electrolyte
contains sulfuric acid and other hazardous materials.
Never place an old battery in the trash. Batteries
must be disposed of in a manner consistent with EPA
and/or local regulations.
Always disconnect the negative terminal first and
positive terminal last. Connect positive terminal
first and negative terminal last. Use care when
testing live circuits to prevent arcing. Arcing
could result in death or serious injury.
Never dispose of waste fluids by pouring on the
ground, down sewer drains, or into any body of
water.