MAINTENANCE AND LUBRICATION 8
en-69
8.17 BACKLAP ________________________________________________________________
Start the engine. Press the LEFT arrow key to display the main menu.
Use the UP
and DOWN
arrow keys to until the green arrow is next to
Backlap.
Press the select button
to select Backlap
Select Debris Clear to clear a blockage in the reels. This will stop the reels for three
seconds, operate the reels in the reverse direction for three seconds, stop the reel for
three seconds and operate the reels in the normal direction.
Select Backlap Stationary to start backlap.
Use the UP and Down arrow keys to increase or decrease the backlap timer. Press the
select button. Backlap timer can be set from 1 and 20 minutes in 1 minute increments.
The parking brake switch must be in the ON position, the traction pedal must be in the
Neutral position, the cutting units must be lowered and the mow switch must be in the
ON position.
The reels will start to operate in the reverse direction and the backlap timer will start.
Press the back, home or select buttons to cancel backlap.
Both the front and rear reel valves contain an adjustable valve to control the speed of
the reels. The front reel valve controls the front three reels. The rear reel valve controls
the two rear reels. Turn the speed control knob to the left to decrease the reel speed.
Repeat for both valves.
Apply lapping compound, with a long handle brush, along the full length of the reel.
When the reels are honed, carefully and completely wash off the remaining mixture.
Repeat the full procedure on the other reels.
M a i n M e n u
L a n g u a g e
C l o c k
D i s p l a y S e t t i n g s
Ve h i c l e S e t t i n g s
S e r v i c e
B a c k l a p
B a c k l a p
D e b r i s C l e a r
B a c k l a p S t a t i o n a r y
B a c k l a p Ti m e r
C o n f i r m t o s t a r t r e e l s i n b a c k l a p
min
20
B a c k l a p E n a b l e d
E x i t i n g t h i s s c r e e n w i l l d i s a b l e b a c k l a p
2 0 : 0 0
Incre
as
e
S
peed
Decre
as
e
S
peed
S
peed
Control
Kno
b
Summary of Contents for 672256G01
Page 96: ......
Page 97: ...SPECIFICATIONS 12 en 95...
