Jackson Labs PHASE STATION 53100A, User Manual

Page: 199 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 199
set <. . .>
When the Telnet server thread is created by TSERVE at startup time, copies of the default values
for the
phaserate , tau0 , referencefreq , prompt , dateformat , timeformat , and title properties
are associated with the server, taking into account any changes made to the program defaults at
the TSERVE command line. These properties subsequently apply to any measurements initiated
by either Telnet clients or by a
/start
parameter on the TSERVE command line. Clients may alter
these server property values by issuing the appropriate set commands. Changes made to the
server property values will apply to acquisitions that are subsequently initiated by that client or
any others.
The following
set
commands are supported by TSERVE:
- set dateformat <1|2|3>
Sets the date format used by the show date command.
1 dd (abbreviated name of month) yyyy
2
mm/dd/yyyy
3 dd/mm/yyyy
The default date format is 1, unless overridden by the /dateformat command-line
parameter.
- set phaserate <rate>
See the description of the /phaserate command-line parameter for more information.
- set referencefreq <auto|MHz>
See the description of the
/referencefreq
command-line parameter for more
information.
- set inputfreq <auto|MHz>
See the description of the
/inputfreq
command-line parameter for more information.
- set tau0 <value>
Sets the tau-zero period for the show adev command in seconds. Values of 0.001, 0.01,
0.1, and 1 second are supported.
Note that changing the tau0 value will recompute the phaserate property, and vice
versa. See the description of the
/phaserate
command-line parameter for more
information. As with phaserate , changes to tau0 are scaled by the
/phasedec
parameter
if a non-default value is provided on the command line.
- set timeformat <24|12>
Sets the time format used by the show date command. The default time format is 24,
unless overridden by the /timeformat command-line parameter.