Assembly Instructions
1. Open battery cover and insert 3 x AA batteries (Fig. 1)
2. Stake or mount into position
a. If staking, assemble 2pc stake and insert into base (Fig. 2a)
b. If hanging, fix bracket using appropriate screws
and mount repeller (Fig. 2b)
3. Turn sensitivity dial to adjust coverage up to 8m / 45sqm
Notes
• The repeller is designed to be left ON continuously
• Do not immerse repeller into water
• Do not cover the PIR sensor
Thank you for choosing Whites’ Ultrasonic Animal Repeller (UAR).
This repeller is designed to help you rid your premises of
uninvited animal visitors such as dogs, cats and rodents
safely and humanely.
Using sophisticated Passive Infrared (PIR) detection, the repeller
detects movement and triggers short bursts of powerful
ultrasonic sound waves.
To assemble and install
FOR
OUTDOOR
USE
Figure 1
Figure 3
Figure 2a
LED Indicator
Ultrasonic
Passive Infrared
Sensitivity Dial
+
–
3 x AA
alkaline battery
Figure 2b
Repeller unit will be exposed to the
elements so ensure unit does not
immerse in water.
Warning
!
Always check underground utilities, cables
or wires before digging or installing!
Failure to check could result in personal injury,
property damage or even death.
TM
Ultrasonic
Repeller
Motion activated animal deterrent
ANIMAL
C
M
Y
CM
MY
CY
CMY
K
ai163574462525_18393 - Ultrasonic Animal Repeller - Instructions_PRINT.pdf 1 1/11/2021 4:30:25 PM