Models 30520-0XXX
SELF-PRIMING PUMPS
FEATURES
Pump Type:
Pedestal Pump
Body:
316 Stainless Steel
Impeller:
Neoprene, Nitrile, Viton* or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic,
or Tungsten Carbide; Nitrile or
Viton
Ports:
1" NPT Internal
Shaft:
316 Stainless Steel
Weight:
8.5 lb (3.9 kg) Approx.
VARIATIONS AVAILABLE
MODEL NO.
DESCRIPTION
30520-0001
Standard Pressure, Neoprene
Impeller, Carbon Seal
30520-0003
Standard Pressure, Nitrile Impeller,
Carbon Seal
30520-0004
Standard Pressure, Viton Impeller,
Carbon Seal
30520-0011
High Pressure, Neoprene Impeller,
Carbon Seal
30520-0013
High Pressure, Nitrile Impeller,
Carbon Seal
30520-0014
High Pressure, Viton Impeller,
Carbon Seal
30520-0101
Standard Pressure, Neoprene
Impeller, Tungsten Carbide Seal
30520-0103
Standard Pressure, Nitrile Impeller,
Tungsten Carbide Seal
30520-0104
Standard Pressure, Viton Impeller,
Tungsten Carbide Seal
30520-0111
High Pressure, Neoprene Impeller,
Tungsten Carbide Seal
30520-0113
High Pressure, Nitrile Impeller,
Tungsten Carbide Seal
30520-0114
High Pressure, Viton Impeller,
Tungsten Carbide Seal
APPLICATIONS
INDUSTRIAL: Circulating and transferring, velocity-mix-
ing, pumping machine tool coolants, spill return, sump
drainage, chemicals, pharmaceuticals, soap, liquors, ink,
dyes, alcohol, dilute acids, tanning liquors, glycerine,
brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and
preparations. Filtering pharmaceutical solutions. Filling
line supply pump.
PAPER PROCESSING: Transferring and applying
starches, sizes, etc. Circulating and processing wood
pulp slurries.
Models 30520-0XXX
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar,
syrups during processing, liquids containing solids in
suspension such as chopped tomatoes, nuts, etc.
Removal of distillery wort and brewery slop. Processing
viscous materials such as peanut butter, mayonnaise,
ketchup, honey, etc. (low speed). Pumping whiskey,
wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbi-
cides and pesticides.
OPERATING INSTRUCTIONS
1.
INSTALLATION – Pump may be mounted in any
position. The rotation of the pump shaft determines
the location of the pump’s intake and discharge
ports. (Refer to dimensional drawing.) Pump is
normally assembled at factory for clockwise rotation
(looking at end cover). If counter clockwise rotation
is desired, follow steps 1 and 2 of disassembly and
step 9 of assembly instructions to change direction
of impeller blade deflection under cam.
2.
DRIVE – Belt or direct with flexible coupling.
Belt Drive: Overtight belt load will reduce pump
bearing life.
Direct Drive: Clearance should be left between drive
shaft and pump shaft when installing coupling.
Always mount and align pump and drive shaft before
tightening the coupling set screw. If pulley or
coupling must be pressed on shaft, remove end
cover and impeller to support shaft from impeller end
during press operation. Do not hammer pulley or
coupling on shaft; this may damage bearing or seal.
*Viton is a trademark of E.I. Du Pont de Nemours and Company.
Explosion hazard. Do not pump gasoline,
solvents, thinners or other flammable liquids.
To do so can cause an explosion resulting in
injury or death.
WARNING
!
