Jabra link 14201-40 EHS Setup
To set up the solution for Panasonic models such as KX-NT553 and KX-DT546, follow these
steps:
1.
Connect the cables between the base of the Jabra headset and the Panasonic phone as
shown below:
a.
Connect the RJ45 plug on the Jabra EHS adapter to the AUX port on the base
of the Jabra headset, and connect the 3.5 mm jack to the 3.5 mm EHS port on
the Panasonic phone.
b.
Connect the handset cable of the phone to the port, marked with a handset, on
the headset base.
c.
Connect the Jabra phone cable (supplied with the headset) to the port marked
with a phone, on the headset base, and the port marked with a handset, on the
Panasonic phone.
2.
Set the following on your Jabra headset:
a.
Set the Jabra headset adapter type to "IQ". (see below instructions for how to
program this setting on your headset base)
b.
Set the phone setup switch for the Jabra headset to position "A". (see attached
doc ‘read me first’ on where to find this setting)
