6
EN
g
Li
Sh
JABrA BT2010 BlUeTOOTh heADSeT
3. Your phone will find the Jabra BT2010
• your phone will find the headset under name “Bluetooth head-
set”. your phone then asks if you want to pair with the headset.
Accept by pressing ‘yes’ or ‘Ok’ on the phone and confirm with
the passkey or pIN = 0000 (zeros). your phone will confirm
when pairing is complete.
Fig. 3
1
2
In case of unsuccessful pairing, put the Jabra BT2010 into pairing
mode manually. Make sure the headset is off. press and hold the
answer/end button for approximately 5 seconds until the leD has
a constant light.The leD will flash before the light is constant –
keep holding down the button until light is constant.
3
4
* phone dependent
Summary of Contents for 2013-02-05 - 2010 ST Monaural Headset
Page 1: ...USER MANUAL...
