Telephone line indicated event (Tamper or Failure) was caused
by the telephone line
digital bus
indicated event (Tamper or Failure) was caused
by a device (keypad or PC) connected to the
digital bus
communication
failure
wireless keypad lost connection with the control
panel
error
self testing error – call installer
tab. 1
88
display specifies mode of the control panel:
user mode
authorized supervisor can test, bypass zones, change
batteries, record voice messages, program tel.
numbers and adjust internal clock in this mode
home arming
system is partially armed – particular detectors are
bypassed (someone remains in the house)
A section armed
A section is armed (split system)
B section armed
B section is armed (split system)
complete
arming
system is completely armed
bypass
warning that some detectors are bypassed –
indicated while arming
key pressed
waiting for more data to complete the entry
programming
mode
for installer programming and testing
tab. 2
3 Controlling the system
The system can by controlled by keypads, remote controls or by a PC with the
Comlink Software.
User codes
Can be used to arm and disarm the system or to reset an alarm. There can be up to
14 different user codes for individual users. The system stores to its memory which
code was used for which operation as well as the time &date of usage. This data can
go to a Central monitoring station and can also be viewed using a PC with Comlink
software. All user codes are empty as a factory default and should be programmed by
the supervisor (see section 4.2).
Alarm system JA-63 „Profi“
- 4 -
MGK51504
Summary of Contents for Profi
Page 1: ...JA 63 Profi User manual...
