SUMMARY
2
1.0 - GENERAL DESCRIPTION
Page 2
2.0 - INSTALLATION AND CONNECTIONS
Page 2
3.0 - CONNECTION DIAGRAM
Page 3
4.0 - ALARM POSITIONING
Page 4
5.0 - SET FUNCTIONS
Page 4
6.0 - USER MANUAL
Page 7
7.0 - MAINTENANCE AND WARNINGS
Page 10
8.0 - COMPLIANCE DECLARATION
Page 11
9.0 - TECHNICAL DATA
Page 11
10.0 - WARRANTY CONDITIONS
Page 12
1.0 - GENERAL DESCRIPTION
GT970 is a remote controlled alarm system for motor vehicles and scooter equipped with
electronic sensor against shocks/movement, back up battery, perimetric protection for
seat/bonnet or sidestand and engine immobilisation. The small dimensions facilitate the
installation.
PROGRAMMABLE FUNCTIONSOF THE SYSTEM (SET FUNCTIONS):
- SHOCKS/MOVEMENT SENSOR ADJUSTMENT
- REMOTE CONTROL HANDSETS SELF-CODING
- RAPID TEST
- ACOUSTIC SIGNAL WHEN ARMING/DISARMING
- POSITIVE OUTPUT WHEN THE ALARM IS ARMED
- EMERGENCY INDICATORS FLASH
- AUTOMATIC ANTI-HIJACK (available only with GT884).
OTHER FUNCTIONS:
- SHOCKS/MOVEMEN
T SENSOR.
- “SERVICE” function.
- PANIC function.
- CHECK CONTROL of occurred alarms.
- Anomalies signalling
- ENGINE IMMOBILISATION.
- Emergency disarming by handset with electronic key incorporated.
- AUTOMATIC-LINK arming with additional special remote control handset.
2.0 - INSTALLATION AND CONNECTIONS
WARNING:
- Complete a pre-installation check and disconnect the negative terminal of the vehicle’s
battery.
- Mount the alarm away from direct sources of water spray and high tension wiring.
- Place the alarm a
s indicated in the “ALARM POSITIONING” paragraph.
- Solder all connections.
- Fix the RECEPTACLE/LED in a position easily visible.
- After having carried out the connections turn the vehicle ignition key on and off to
make the system operating.
