![background image](http://html1.mh-extra.com/html/jabiru/j120/j120_technical-manual_3130523086.webp)
Aircraft Service Manual
Jabiru Aircraft
Pty Ltd
JTM001-1
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
REVISION
1
Dated: Nov 2011
Issued By: SW
Page: 86 of 233
Figure 56
– Wing Inspection Panel
7.13 FIN
The Fin is a moulded composite structure supported by ribs and a rear spar. Hinges attach the rear
spar to the rudder.
7.13.1 REMOVAL, INSTALLATION, INSPECTION AND REPAIR
The fin is an integral part of the fuselage structure and cannot be removed.
All repairs must be referred to Jabiru Aircraft Pty Ltd or our approved local agent.
7.14 HORIZONTAL STABILISER
The horizontal stabiliser is a moulded stressed-skin structure of rigid cellular polystyrene bonded to a
fibreglass skin and rear spar.
7.14.1 REMOVAL AND INSTALLATION
The horizontal stabiliser is an integral part of the fuselage to which it is bonded. It cannot be
removed.
All repairs must be referred to Jabiru Aircraft Pty Ltd or our approved local representative.