![background image](http://html1.mh-extra.com/html/jabiru/j120/j120_technical-manual_3130523132.webp)
Aircraft Service Manual
Jabiru Aircraft
Pty Ltd
JTM001-1
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
REVISION
1
Dated: Nov 2011
Issued By: SW
Page: 132 of 233
10.4.4 FLAP CROSS SHAFT INSTALLATION
Installation procedure is the reverse of assembly.
After installing carry out a test run while watching the external flap drive arms. Ensure the arms do
not rub against the fuselage or wing mounts.
WARNING
All spherical rod end bearings must be fitted with a large washer on the outside of the through-
bolt to prevent the bearing case and cable releasing in the event of a bearing failure.
Figure 104
– Flap Cross Tube Assy J160 Family