![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313169.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 169 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
9.9.3 Subassembly B Build Sheet
– Crankcase and Camshaft Assembly
Table 17
– Build Sheet B
No.
Details
Para
Initials
Checked By
Date
B1
Inspect case, deburr, clean, check oil holes
B2
Fit inner crankcase
“O” rings
B3
Fit all studs. Use Loctite 620 on threads.
B4
Fit crankcase dowls
B5
Blue and fit bearing shells
B6
Assemble and torque
B7
Measure main bearings
B8
Measure Cam Follower Bores
B9
Disassemble
B10
Fit oil relief valve, oil pressure sender and
pressure switch. Use Loctite 262 to seal pressure
sender & switch.
B11
Fit Solid Lifters
B12
Check Camshaft End Float
B13
Check Crankshaft End Float
B14
Record measurements & clearances in build
record sheet - Table 26. Ensure all measurements
and clearances are within the appropriate limits
given in Table 10 and Table 12
-
B15 Stage B - Stage Inspection of Assembly
I hereby certify that the above subassembly has been assembled in accordance with the applicable Jabiru
Pty Ltd Instructions and Maintenance procedures.
Signed:
Date:
for Jabiru Aircraft Pty Ltd