Jabbla Zingui, Manual

Page: 11 / 36

Zingui
5
3 - Switch on/off the Zingui
3.1 Switch on the Zingui
Shortly press the on/off switch (5) to switch on the Zingui. The on/off indicator
will start blinking during the start up procedure. The Zingui will be ready to use
as soon as the on/off indicator stops blinking and continuously lights up.
The Zingui will also automatically turn of the screen when it feels no activity
during a specific time. The Zingui is not in standby mode, the on/off indicator
stays on. The screen will immediately display the content as soon as you touch
the screen or activate an external switch.
3.2 Standby
You can bring the Zingui in a Standby mode by shortly pressing the on/off switch
again. The on/off indicator will now blink every 4 seconds. The power
consumption in standby mode is very low. Press the on/off switch to wake up
the Zingui from the Standby mode. Waking up will take no time so that you can
immediately restart to communicate.
3.3 Switching the Zingui off
Press and hold the on/off switch for 4 seconds to turn off the Zingui completely.
We recommend doing so when the Zingui is not going to be used for a longer
period (a few days). When you are using the Zingui every day, you can put the
Zingui in standby in the evening and charge it.
3.4 Reset
In the event that the Zingui should not react anymore you can execute a reset by
pressing the Reset button on the back of the device. The Zingui will be switched
off. Press the on/off switch shortly to restart.