Jabbla Tellus 4, Manual

Page: 10 / 38

Tellus 4
4
2.1.1 Air Vent Flow
Provides secondary cooling for the processor. Do not obstruct the ventilation
slots.
2.1.2 System Buttons
Buttons1 and 3 are programmable buttons. The default factory settings are
volume up (button 1) and volume down (button 3).
Pressing Button 2 for longer then 1,5 sec executes the same function as the
ESCape key on a keyboard. It allows to stop switch scanning algorithms. This
will also display again the title bar in case it was hidden (See also Mind Express
Manual).
Press button 2 shortly to generate a right mouse click on the next screen touch.
2.1.3 Socket SIM card
The Tellus has an internal UMTS module to allow to join a broadband network
(internet, GSM datatransfer). To enable access to such a mobile radio network
you need to place a SIM card in the Tellus that support this feature.
Open the protective rubber cover of the SIM card slot. Do not pull on the SIM
card lock! The lock could break off otherwise. But always slide the lock in the
direction of the arrow as shown.
Slide the SIM card lock (a) in the direction of the arrow (1). The clip (a) controls
the power supply for the UMTS module. The UMTS module is switched off while
the clip is open.
Slide the SIM card with its contact points upwards as shown into slot (2) until it
engages.
Slide the SIM card lock (a) in the direction of the arrow (3).
Close the protective rubber cover of the SIM card slot.
2.1.4 Mounting Plate
Compatible DaeSSy Mounting plate for easy and save mounting via the quick
release Daessy Mounting System.
2.1.5 Air Vent Flow
Provides secondary cooling for the processor. Do not obstruct the ventilation
slots.
2.1.6 Second Battery / DVD cover
Tellus can be equipped with a second hot swappable battery. This means that
you do not need to switch of the Tellus to replace the 2nd battery. The 2nd
internal battery is located behind the battery cover. Only open the battery cover
unless it is necessary.