Allora 3
Figure 5: Fitting the keyguard
1.
Lay the keyguard (2) on the keyboard at the desired height setting.
Rotate the keyguard if you prefer another height setting.
2.
Fit the clips (1) (3) to secure the keyguard to the keyboard.
4
Switch on the device
Press the key until the on/off indicator lights up.
The device first displays the start-up screen with the Jabbla slogan
We all have a voice
. When the cursor flashes, the
device is ready for use.
The device starts up immediately from sleep mode.
5
Switch off the device completely
You usually put the device into sleep mode so that you can subsequently start to use it quickly. You can switch off the
device completely if, for example, you want to store if for an extended period.
1.
Press
.
2.
Select
General
>
Shutdown
.
6
Enter text and have it read out
1.
Enter your text by typing it and add words and sentences using word prediction and sentence prediction. Press to
type in digits and on
+ to enter special characters.
TIP
You can use digits without
Num Lock
being active by pressing and holding the numeric key.
NOTE
Press
to clear text letter by letter or to clear all text.
2.
Press .
The displayed text is read out.
D
Getting started
12
4
Switch on the device
Summary of Contents for Allora 3
Page 1: ...Allora 3 Operating instructions ...
Page 6: ...Allora 3 4 ...
Page 37: ...Allora 3 35 ...
Page 38: ......