BSR KIT J4C 140
TO
300
(EN)
ASSEMBLY INSTRUCTIONS
The
BSR
safety block system is an automatism
that, when coupled to the J4C multi voltage
electric actuators, lets the valve situate in a prefe
-
rable position NC or NO, when there is a power
supply failure. Inside of the housing there are a
BSR
print circuit board and a battery pack, which is
kept in continuous charge.
In case of the valve is not in the preferable
position and there is a power supply cut, the
BSR
system returns the valve back to the preferable
position by means of the batteries tension, opera
-
ting as a “single acting” actuator.
0
8
OUTSIDE BOX
INSIDE BOX
