Transmitter: Receiver
：
Port name
Description
INPUT / OUTPUT
HDMI signal input/output
IR IN / OUT
IR signal input/output; TX/RX have matching
connectors
IR
Remote control receiver
DC 5V
Power adapter socket
Channel
Digital display tube 50-59 5G band
Back; Down; UP; OK
Key
Used to adjust the WIFI frequency
LED indicator
Description
STA
Static Light-Device has booted up
STA
Flashing Light-Data is being transmitted and
received
PWR
Static Light-Power on
1.
Plug in the power supply for the transmitter and receiver. Once the transmitter and receiver has
booted up, you will have a blue static
“
STA
”
light. Once the transmitter and receiver has made a
good connection, you will have a blue static
“
LINK
”
light.
2.
Connect the source to the HDMI transmitter input port.
3.
Connect the HDMI receiver to a display device (such as high-definition TV or projector).
4.
Connect the 3.5mm standard IR cable to transmitter
“IR OUT”
port and receiver
“IR IN”
port.
5.
Make sure the transmitter and the receiver are placed in the final positions, clear of any walls.
6.
If you see a consistent flashing blue
“
STA
”
light, then data is being transmitted and received properly.
Panel Descriptions
Installation
