J Plus, Inc
6 Web GUI Operation
6.1
Web GUI Menu
Table 10 and Table 11 describe each menu where the user can configure and check the setting of Small Cell.
Menu Tree
Description
> Configuration
>> General
>>> Network Interface
Add, modify, and delete Network Interface. Configure IPv4/6, DHCP/Static IP and Vlan
>>> Network Function
Configure Vlan in each Interface
>>>Security Gateway
Enable or disable Security Gateway.
>>>DHCP Server
Enable or disable DHCP server in LAN port
Enable or disable CWMP for connecting HeMS and configure IP address of the HeMS
>>> CWMP
as well.
>>> Clock sync &
Configure clock sync mode (GPS, IEEE 1588v2, Air sync) and NTP information. Also,
Sys time settings
Downlink Time Offset is configurable.
>>> WAN port
Configure Ethernet port information.
>>> Statistics Report
Configure the server information to which statistics data is uploaded.
>>> Optional Setting
Configure the Host name and IP address of the LAN port.
>>> Static Routing
Configure static routing information if necessary.
>>> SAS
Configure SAS if necessary.
>> PKI
>>> eNodeB
Configure eNodeB private key and certificate information.
>>> CA Certificates
Import CA certificates.
>>> CMPv2
Configure CMP server information and select CMP request option.
>> LTE
Configure basic primary cell information including Cell ID, TAC, PCI, PLMN ID,
>>> Basic
EARFCN and TDD configurations etc.
Turn ON or OFF RF transmission and set the maximum transmit power for each
>>> RF
antenna port.
>>> S1AP
Configure MME information.
>>> MR
Trigger quantity and threshold values can be configured.
>>> Neighbor Cell
Neighbor Cell configurations can be configured.
>>> UTRA Frequency
UTRA Frequency configurations can be configured.
J Plus Proprietary and Confidential 26 / 98
